1. Battery polarity must be negative by iron, can not meet the.Otherwise, will blow out the generator or regulator electronic components;
2. When the generator, cannot check whether generator power generation with the method of the fire test, otherwise it will burn out diode;
3. The rectifier and stator winding connection, banned by megohmmeter or 220 v ac power check the insulation of the generator;
4. To secure connection of the generator and battery, such as sudden disconnect, will generate overvoltage damage generator or regulator electronic components;
5. Once you find malfunction with the alternator or regulator shall promptly repair, timely troubleshooting, should no longer be continuous operation;
6. Is alternator regulator, alternator voltage grade must be the same as the regulator voltage grade, the alternator take iron type must be the same as the regulator by iron type, power regulator shall not be less than the power of the generator, otherwise the system doesn't work;
7. Wiring must be correct, the installation position and the connection mode of various models regulator each are not identical, therefore, be especially careful when wiring.
8. The regulator must be controlled by the ignition switch, generator stop running, the ignition switch should be, otherwise it will make the magnetic field generator circuit has been connected state, not only will burn out field coil, and will cause battery lost electricity.
